Defog Your Surveillance Camera

Usually purchase bullet style surveillance trail camera 2017s they will sometimes run into an issue with them fogging up or having moisture inside the glass enclosure. This can be rather the nuisance as can make it quite hard to get a quality video. I’m going to address the steps recommended to try and solve this.

Best trail camera under $100

Before starting please pay attention to that the steps related this may void your warranty, connect with one another would act as a good idea to meet with your surveillance equipment provider before beginning.

Step One

Remove the hood / sunshield if that would help.

Some bullet style security trail camera 2017s, specially the outdoor trail camera 2017s will have a hood or sunshield along with of them to help along with the elements. You will first prefer to remove this shield. Generally these hoods will slide off, however, it may an increased level of bit of force as they are secured on rather tightly; also be sure that they are not screwed into the mount, and when they are remove the screw.

Step Two

Unscrew the glass dealing with.

At the finish of your bullet trail camera 2017 you will have a cap that can be screwed on and off. This cap contains your glass covering that is fogging up and heading need with regard to removed from an security photographic trail camera 2017. Be aware that an O-ring possibly be present guide you with the sealing for the cap. Do not lose this O-ring.

Step Three

Use comfortable towel along with several Rain-Ex.

Now that have your last cap screwed off, you’ll need a soft towel that is not going to scratch the glass which includes bit of Rain-Ex.

Take and apply the Rain-Ex for the glass cover as instructed from the bottle advertise sure to dry it away thoroughly article advertising. Do NOT get any Rain-Ex the actual planet surveillance trail camera 2017 itself.

This in order to done in a cooler environment with relatively low humidity to possess best design.

Step Four

Re-assemble your surveillance digital slr trail camera 2017.

Put your glass covering cap back on the bullet trail camera 2017 along together with O-ring if applicable; then reattach your hood and this should help solve your fogging issues.

Quick Overview For Defogging Your Bullet trail camera 2017

1.Unhook the sunshield / hood

2.Remove the glass covering cap end

3.Use comfortable towel and apply Rain-Ex to the glass covering

4.Reassemble your surveillance trail camera 2017

These steps will help alleviate problems with and fix any issues your bullet trail camera 2017 could quite possibly have with fog on the glass spanning. If the problem persists after doing this; definitely consult a surveillance professional for further options.

Christian M Gillman worked as kitchen staff in the surveillance industry for over 6 years. To be able to our monthly newsletter, discover for yourself about surveillance, and find great products at

– CU1 – Your CCTV Services Surveillance Equipment Source